Truck Bumper Cover

Remove A Truck Bumper Cover:

1. Unbolt the hood of the Ridgeline and place the clips beside the top of the front of the truck where the hood bolt is positioned. There are seven black plastic clips that can go off with a flat head screwdriver. Use the screwdriver to take out the entire clip out.
2. Find the two screws which are situated on each side of truck that are at the border of the fender wells and take away them with a Philips head screw driver. They can be located by looking up from below the truck, right at the front of the fender wells.
3. Stretch out on the ground below the front of the truck and exactly under the bumper coverand use a ratchet and 10mm socket to take out the six bolts beside the edge.
4. Put down the blanket on the ground to lay the truck bumper cover on it. Start dragging the bumper cover from the truck. There are tags placed under the headlights which hold the bumper cover in place. Grip the truck bumper cover at the exterior edge of it and pull tightly so that the tabs should come out.
5. Leave the truck bumper cover on the blanket to avoid scratches on the ground. The bumper cover is heavy and some part of the painted shell will come in contact with the ground